Industrial Oil

Sanlube Hydraulic Oils are oils designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants,anti corrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems also of systems where high pump speeds are encountered. San Lube Hydraulic oil  grades possess the following characteristics:
Right viscosity to satisfy the demands of the hydraulic pump and the designed system.
High viscosity index to restrict viscosity changes under operating conditions
Good film strength and antiwear properties to Minimise wear of pumps, valves, cylinders, pistons etc.
Maximum demulsibility to allow entrained water to settle down.
Excellent corrosion resistance to prevent rusting and corrosion of metal parts.
Resistance to foaming to ensure prompt and efficient functioning.
High chemical stability to ensure long and trouble free service life.

SANLUBE HYDRAULIC OILS are oils designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants,anti corrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems also of systems where high pump speeds are encountered. San Lube Hydraulic oil  grades possess the following characteristics:

Right viscosity to satisfy the demands of the hydraulic pump and the designed system.

High viscosity index to restrict viscosity changes under operating conditions

Good film strength and antiwear properties to Minimise wear of pumps, valves, cylinders, pistons etc.

Maximum demulsibility to allow entrained water to settle down.

Excellent corrosion resistance to prevent rusting and corrosion of metal parts.

Resistance to foaming to ensure prompt and efficient functioning.

High chemical stability to ensure long and trouble free service life.

SANLUBE HYDRAULIC OILS are oils designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants,anti corrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems also of systems where high pump speeds are encountered. San Lube Hydraulic oil  grades possess the following characteristics:
Right viscosity to satisfy the demands of the hydraulic pump and the designed system.
High viscosity index to restrict viscosity changes under operating conditions
Good film strength and antiwear properties to Minimise wear of pumps, valves, cylinders, pistons etc.
Maximum demulsibility to allow entrained water to settle down.
Excellent corrosion resistance to prevent rusting and corrosion of metal parts.
Resistance to foaming to ensure prompt and efficient functioning.
High chemical stability to ensure long and trouble free service life.

SANLUBE HYDRAULIC OILS are oils designed for use in circulating systems are made from high viscosity index, chemically stable group II  base stocks which are further fortified with antiwear and antifoam additives. They meet the requirements of very high pressure systems also of systems where high pump speeds are encountered. Sanlube HM Water White Range of Hydraulic  oil  grades possess the following characteristics:
Appropriate viscosity to satisfy the demands of the hydraulic pumps.
High viscosity index to restrict viscosity changes under operating conditions when there are variable temperatures.
Good film strength and antiwear properties to Minimise wear of pumps, valves, cylinders, pistons etc.
Maximum demulsibility to allow entrained water to settle down.
Excellent corrosion resistance to prevent rusting and corrosion of metal parts.
Resistance to foaming to ensure prompt and efficient functioning.
High chemical stability to ensure long and trouble free service life.

SANLUBE HYDRAULIC OILS are oils designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants,anti corrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems also of systems where high pump speeds are encountered. San Lube Hydraulic oil  grades possess the following characteristics:

Right viscosity to satisfy the demands of the hydraulic pump and the designed system.

High viscosity index to restrict viscosity changes under operating conditions

Good film strength and antiwear properties to Minimise wear of pumps, valves, cylinders, pistons etc.

Maximum demulsibility to allow entrained water to settle down.

Excellent corrosion resistance to prevent rusting and corrosion of metal parts.

Resistance to foaming to ensure prompt and efficient functioning.

High chemical stability to ensure long and trouble free service life.

LUBROL MACHINERY  OIL’s provide good oiliness for general lubrication of machinery even under boundary lubrication conditions. These products maintain a thin film of oil under light and medium loads and provide protection against corrosion and rust even during idle periods. LUBROL MACHINERY  OIL’s oils are recommended for all types of industrial machinery using once-through lubrication systems. Also recommended for use in the lubrication systems of machine tools, textile machinery and other machine parts which are lubricated by a thin film of oil. Heavier grades of Lubrol oils can be used in the lubrication of small open gears under light duty conditions where oil is applied intermittently .

SANLUBE MULTIGRADE engine oils are environment friendly, fuel efficient, multi grade motor oils. These oils contain detergent, dispersant, antioxidant to provide long engine life.A multi grade oil containing a special Viscosity index improver additive which imparts Exceptional Viscosity-temperature characteristics to the oil. Provides ease in cold starting, reduced oil consumption, enhanced engine cleanliness, longer battery life.

Sanlube Hydraulic Oils are oils designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants,anti corrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems also of systems where high pump speeds are encountered. San Lube Hydraulic oil  grades possess the following characteristics:
Right viscosity to satisfy the demands of the hydraulic pump and the designed system.
High viscosity index to restrict viscosity changes under operating conditions
Good film strength and antiwear properties to Minimise wear of pumps, valves, cylinders, pistons etc.
Maximum demulsibility to allow entrained water to settle down.
Excellent corrosion resistance to prevent rusting and corrosion of metal parts.
Resistance to foaming to ensure prompt and efficient functioning.
High chemical stability to ensure long and trouble free service life.

These are industrial extreme pressure gear lubricants, specially developed for the lubrication of heavily loaded enclosed gear sets including spur, helical and bevel designs and provide protection in applications where shock loading occurs. SANLUBE Gear Oils have high load carrying ability, protection against wear; helps to reduce sludge formation and increases oil service life. Further these oils provide strong protection against corrosion of steel and copper containing alloys and resists foaming besides having good water separation properties for easy water elimination.
These oils are formulated with high quality base stocks and carefully selected sulphur/phosphorus extreme pressure additives to provide high levels of anti-wear & E.P. properties.

SANLUBE THERM SERIES are manufactured from highly paraffinic base oils having high viscosity index. These base stocks with exceptional oxidation stability have been found ideal for blending of heat transfer oils. These have high thermal conductivity and adequate specific heat to offer effective heat transfer.Our clients can avail from us a broad array of Heat Transfer Oils that possess excellent resistance to thermal cracking and chemical oxidation. The offered oils are specifically formulated for heat transfer in Textile, Pharmaceutical, Chemical and Processing Industries, equipped with indirect or secondary heating systems integrated with expansion tanks. These oils have high specific heats and thermal conductivities to provide good heat transfer efficiency. Further, these oils have optimum viscosity so that these can be pumped readily at both start-up and operating temperatures. Formulated using extremely stable and high viscosity index base oils coupled with a low pour point, these oils are fortified with high temperature oxidation inhibitors.

These high quality lithium based non extreme pressure greases are intended primarily for basic industrial multi-use applications.They are formulated using medium viscosity mineral oil, Lithium 12 hydroxystearate soap and fortified with additives to enhance oxidation stability, prevent rust and reduce wear.Petronas Grease   Li 3 have high chemical stability, enhanced structural properties, and good resistance to water washing.

Owing to our expertise, we are engaged in offering premium quality Shuttering Oils. These are one  of the best quality oils ready to use form work/mould release agent. Based on petroleum distillates,  these oils find application in all operations, involving concrete release. These oils are formulated  using the best grade highly refined base oils and selected additives. Further, these oils have  optimum viscosity and prevent the formation of rust & sludge. We offer these shuttering oils in  different quantities at industry leading prices.

These are industrial extreme pressure gear lubricants, specially developed for the lubrication of heavily loaded enclosed gear sets including spur, helical and bevel designs and provide protection in applications where shock loading occurs. SANLUBE Gear Oils have high load carrying ability, protection against wear; helps to reduce sludge formation and increases oil service life. Further these oils provide strong protection against corrosion of steel and copper containing alloys and resists foaming besides having good water separation properties for easy water elimination.

These oils are formulated with high quality base stocks and carefully selected sulphur/phosphorus extreme pressure additives to provide high levels of anti-wear & E.P. properties.