Metal Working Fluids

SANLUBE Clear Cut 200 is fortified with appropriate additives to prevent bacterial degradation of the emulsion. It also prevents rusting of the work piece and machine tool beds. It is recommended for a variety of cutting operations on both ferrous and non-ferrous metals. For general machining operations the emulsion is normally prepared with 5% oil and for grinding operation the emulsion has 2% of oil.

RUSTOLIN 22 is high quality rust preventive which forms a soft greasy and temporary protective film on the evaporation of the solvent. This rust preventive has very good water displacement characteristics and finger print neutralization properties

Solvent cut type Rust Preventive oil for domestic use

DESCRIPTION Servo Hone 7 is a low viscosity mineral oil specially developed for honing operations.   It has extra fluidity to ensure quick and thorough flushing action.   It is blended with the highly refined lube oil base stocks fortified with high performance chemical additives to enhance its properties to meet the honing operations.  It has excellent cooling efficiency due to low viscosity of  Servo Hone 7. PERFORMANCE STANDARDS ∑It has been performing exceedingly well in honing operations for automotive Equipmentand Parts. ∑Many Automotive Manufacturers and Bearing manufacturers have been using this grade satisfactorily. APPLICATION Apart from all type of surface finishing operation Servo Hone 7 can also be used in low severity machining operation such as grinding, Turning etc. It is widely used for honing of ball bearing races and is ideal for super finishing operations, even on hardened metals.   It is also suitable for flat honing operation a gauge blocks and gudgeon pins. PERFORMANCE BENEFITS ∑It provides excellent surface finish. ∑It gives long life to the honing stick/ stones. ∑It has excellent Cooling andheat Transfer ability . ∑Excellent Flushing action.

SANLUBE EDM Oils are highly refined mineral oils of narrow boiling range manufactured to meet the di-electric strength requirements of end use. It is specially processed for general purpose mold and dies applications involving optimum rates of metal removal, proper flushing and close tolerances. It is low in viscosity to facilitate excellent cooling of electrode as well as work-piece and can be availed at reasonable rates.

SANLUB Cut 600 is fortified with appropriate additives to prevent bacterial degradation of the emulsion. It also prevents rusting of the work piece and machine tool beds. It is recommended for a variety of cutting operations on both ferrous and non-ferrous metals.
For general machining operations the emulsion is normally prepared with 5% oil and for
grinding operation the emulsion has 2% of oil.